WE865-DUAL HW User Guide
1vv0300787
Rev. 1 - 03/10/08
Reproduction forbidden without Telit Communications S.p.A. written authorization - All Rights Reserved
page 21 of 48
4.3.1 Reset
An active high host reset (RESET, ball D2), allowing the WE865-DUAL to be reset by an external
device (host).
This pin is internally pulled-down, do not drive the signal during normal operation.
The signal must be asserted for a period greater than 1ms.
VOLTAGE LEVELS @ 25 °C
Min [V]
Max [V]
Remark
VIH
2,0
3,0
-
Table 9
Figure 7
WE865-DUAL
RESET