LE910Cx-WE866Cx LTE Bundling User Guide
1VV0301578 Rev. 9
Page
51
of
56
2020-05-26
AT#BSCAN
For filtered scan to show results each time, the
advertising interval should be set low on the peripheral
device.
AT#BATTRIB
After BLE initialization, once the advertisement is
started the service cannot be added. All services must
be defined before starting advertisement.
7.3.2.
Features
Following is the list of NOT supported features:
Features/Items
Related AT
Command
Parameter
Base64
encoding/decoding
of socket
sent/received data
AT#BASE64
Adjusting a time
interval for series
of UDP data
packets
AT#SD
<txTime>
Viewing data with
UDP datagram
information
AT#SCFGEXT
<srMode>
Send and receive
data in
Hexadecimal
format
AT#SCFGEXT
<dataMode>
<sendDataMode>
Abort Connection
attempt
AT#SCFGEXT2
<abortConnAttempt>
NO CARRIER
indication
AT#SCFGEXT2
<noCarrierMode>
BLE IO
capabilities
AT#BIOCAP
BLE FixPin
AT#BFIXPIN
7.3.3.
Others
•
Echo configuration display does not reflect the actual configuration.
•
For UDP sockets, IPV6 connection is NOT supported
•
For UDP Listen mode Sockets, AT#SS command (status command) will display
“Local IP” as all zeros.
•
Socket Info command (AT#SI) displays the parameter <ack waiting> as zero.
