3
1 Module operation
Application area:
Optional GSM communicator for alarm control panels
Individual GSM communicator with 2 inputs
Temperature monitoring and intervention using the 2 relay outputs
Simple GSM controller for gates
Other remote controlling applications
1.1 Functions
GSM voice call to 4 user phone numbers with recordable voice message or siren
tone, on input activation
Sends SMS about each event with customizable message
Report to monitoring station with Contact-ID protocol about each event
Temperature measuring and event generating at min./max. thresholds (optional)
Relay remote control with free phone call
Control of the relays by input or temperature event (optional)
Car alarm adaptation (monitoring of rhythmical regular impulses)
Programming: through USB or modem connection using software, or by SMS
1.2 Features
4 user phone numbers for GSM calls and SMS sending
Forwards incoming SMS messages to the first user phone number
1 monitoring station phone number for reporting
2 NO/NC inputs
2 NO relay outputs
Possibility to connect temperature sensor
2 Settings
The module can be configured using its programming software, through USB or modem
connection, or by sending com
mands in SMS to the module’s phone number, according
to the instructions found in “
Configuring by SMS commands
” chapter. The programming
software is available on the module‘s USB drive. After connecting the module to a PC
through USB, it will be recognized as a new drive and it creates a new USB HID device
as well.
The programming software runs on the following operating systems:
-
Windows XP SP2
-
Windows 7
Copy the programming software from the module to a suitable place on the PC.
The software is available in the following folder:
”Drive letter”
:\Software\Remoter\Remoter.exe
