3
1 Application
GPRS communicator for alarm control panels, which converts the Contact ID
communication into SIA IP format and forwards the events towards the monitoring
station’s receiver using IP channel over mobile GPRS network. Can be used for any
alarm system which is able to report to monitoring station in Contact ID format using
PSTN landline. Using the adapter, the alarm control panel’s signals are sent to the
monitoring station’s IP receiver over the GPRS network, using SIA IP protocol based on
ANSI/SIA DC-09-2007 standard. No need for a central server, only an IP receiver with
internet connection is necessary. The list of the supported receivers is available on
www.tell.hu
website.
2 Functions
Converting Contact ID format and signal transferring in SIA IP format
Backup Contact ID communication over GSM voice call in case of IP error
Forwards incoming SMS messages
Settings can be configured by PC or SMS
Possibility to send test report to more IP address, and continuous monitoring of the
connections
Evaluates and shows estimated data traffic
The programming software and manual are available on the internal memory of the
device which acts as a USB drive
