15
In the 'GSM settings' section enters the PIN code to unlock the SIM card. In order to prevent the
module from reaching the PUK code after entering multiple incorrect PIN codes, there’s a built-
in protection. The device tries a PIN code only once and as soon as no more PIN1 trial left,
stops trying.
In the same section, you can enter the SIM card's phone number, the daily SMS limit and the
SMS centre number. SIM card providers may require the SMS centre number for their SMS
service.
The device can also forward the incoming SMS messages. To use this feature, enter the
desired phone number on the 'Phone numbers' page and then on the 'Module settings' page,
select which phone numbers you want the incoming SMS messages to be forwarded to. For
more details on setting up the phone numbers, see 4.5.1.
The SIM card's APN can be set in the 'Access point settings' section. You can obtain the SIM
card's APN from your SIM card provider. In case the APN is not public you can also set the
username and password in this section. It is important, that certain closed APNs do not allow to
use the Internet freely, but provide access only to selected IP addresses. These closed APNs
may block the use of Pager 7 features which require Internet access.
Attention!
If the access point settings are incorrect, the module's internet based services
won't be available!
The 'TELL server settings' section is for setting up the server access. In default these fields are
filled with the data of manufacturer's server reserved for this purpose, which are the followings:
Url: pager.devicemail.net
Port: 2018
If the name resolution doesn't work with your service provider replace the URL by the following
IP address: 54.75.242.103
Attention!
If the server settings are incorrect, certain services of the module won't be
available!
