35
Toggle arm:
Depending on the status of the partition or partitions, the module fulfills arming or disarming
action. By adding the action, the partition or partitions have to be chosen, which are requested
to get armed or disarmed.
Alarm:
The action starts the alarm. The opposite of this ac
tion is ‘Stopping alarm’.
Clear alarm:
The ac
tion stops the alarm. The opposite of this operation is ‘Alarm’.
Push notification:
You can send Push message to one of the mobile devices
, listed in ’Push notifications’ menu
point. The message can be selected
from the texts added in ’Text templates’ menu or you can
also add new text by clicking on the ’Add’ button.
Attention!
If the action has a restore-
pair, and ‘Add a reset event’ option is switched on,
the event assigns the opposite action of the original action (e.g. arming-disarming)! In
case
the action doesn’t have a restore action, the ’Add a reset event’ option is not
available.
Operation priority:
You can assign more actions to one event, which will be fulfilled as per priority level. The order
of the same priority actions can be changed after the first adding and saving of the event. The
‘Immediate’ priority actions will be fulfilled out of turn, while ‘High’ and ‘Low’ priority actions will
be listed among the actions, waiting for fulfilment, and will be fulfilled according to their priority.
High priority actions are usually the ones which require GSM network, but can be fulfilled
quickly, while the time-consuming actions have lower priority (e.g.: a phone call).
4.8.3 Presets
The predefined event-action schemas help by adding frequently used events and their actions.
This is for instance ‘Report zone detects’ and ‘Alarm on zone detect’ presets.
