5. Battery instructions
Battery power indicator, please refer to the drawing
：
Full charged Low battery Needs to be charged
After the camera is connected to the power supply, the red
charging indicator will light up during the charging process.
The whole charging time is about 180 minutes. The red
charging indicator will turn off after the battery is fully
charged.
Note: this device is designed to work for a period of time
when following the car. The built-in battery is only designed
to save files when parking and shutdown. The working time of
the fixed battery is limited.
6. Reset
If the recorder is not working properly, the system can be
reset by pressing the RESET button.
7. License plate marking
Press the menu key once to bring up the settings menu,
press the menu key once to select the setting menu, then
press the down key to find the License plate number option,
and press [OK] to enter the change. A total of 9 license plates
are composed of "Numbers" and "letters". When the license
plate number is less than 9 digits, select a number and
replace it with a space. After setting the license plate, press
the menu key to exit. Then press the down button to find the
license plate switch option and select open. When recording,
the video will have the license plate number marked in the
fixed position of the image.
