PRODUCT INSTALLATION
Important notes:
- Prior to final wall installation, charge the camera
batteries using the USB cable for at least 10 hours.
- Avoid mounting the device in a place where the
temperature changes too much, such as heat source,
air-outlet, etc. it will cause the equipment to send false
alarms.
- Ensure that the solar panel is exposed to light for
optimal charge. If the place where you mounted the
camera does not get enough sun light, you can install
the solar panel separately, within a range of max 3m.
- Ensure the camera is securely fixed in position
- Ensure the battery compartment is sealed and the
screws are not loose.
- Make sure the batteries are NOT wet, moist, damaged,
or broken.
Quick setup
1.Insert the USB cable of the solar panel into the USB
Silicone Flap on the bracket base to charge the battery.
2.Press the Power switch to turn ON/OFF the camera.
3.Follow the voice prompt step by step to pair the
camera with the app.
Note
1.Before turning on the camera, please make sure the
silicone flap is closed to avoid rain leakage.
2.Mare sure your phone is connected to the 2.4GHz
wireless network before you start the pairing procedure.
