English
Operating instructions
15
Check that Timer knob
is turned counterclockwise (start-
ing position) to avoid starting refrigerator unnecessarily.
CAUTION: DO NOT TURN Beater Switch to EXTRACTION
(left) as this would cause water to be suddenly ejected out of
the cylinder.
-
stop beater, put a container under the cylinder drain (or extraction door) and open
it to let water out of the cylinder.
7.2
Disassembling of the parts
To make washing and sanitization easier, all parts coming into contact with the product can be easily and quickly disassem-
bled directly by the user.
T
HESE
OPERATIONS
MUST
BE
CARRIED
OUT
ONLY
AFTER
DISCONNECTING
MACHINE
FROM
MAIN
POWER
!
-
Carry out rinsing operations (ref. Par. 7.1) in order to easily reach machine's
parts;
-
remove lid [5] (if necessary remove hinge pin [25]);
-
remove drain plug [4];
-
unscrew counterclockwise fixing knob [7] and remove beater [6];
RESIDUAL HAZARD:
BEATER
'
S
BLADE
ARE
SHARP
ALONG
BOTTOM
AND
EXTERNAL
SIDE
EDGES
. I
T
IS
RECOMMENDED
TO
USE
SUITABLE
PROTECTIVE
GLOVES
AND
TO
HANDLE
THE
BEATER
ONLY
BY
HOLDING
THE
CENTRAL
HUB
AND
NOT
THE
BLADES
.
-
remove basin support [10] (if applicable) by unscrewing knobs [16];
-
unhook chute [9] (if applicable) from hinges [26] and remove it;
-
for a thorough wash, separate blades [31] (take care not to loose screws).
7.3
Washing
T
HESE
OPERATIONS
MUST
BE
CARRIED
OUT
ONLY
AFTER
DISCONNECTING
MACHINE
FROM
MAIN
POWER
!
D
O
NOT
ALLOW
WATER
OR
ANY
OTHER
LIQUID
INSIDE
THE
MACHINE
.
T
O
CLEAN
CONTROLS
ON
FRONT
PANEL
ONLY
USE
A
DRY
CLOTH
OR
ONE
SLIGHTLY
DAMP
WITH
DETERGENT
. N
EVER
USE
WATER
OR
ANY
LIQUIDS
!
All parts coming into contact with the product must be carefully washed and sanitized to comply with health regulations
currently in force.
