English
Ice cream freezer
6
3
T
ECHNICAL
DATA
3.1
Technical data plate and EC marking
The technical data plate and CE marking must not be removed. It is located on the back part of the device and identifies:
-
the name and address of the manufacturer [F];
-
the designation of the model [MOD] and the relative series number [S/N];
-
the type and quantity of freezing gas contained [GAS];
-
the year of construction [ANNO];
-
the values of voltage and frequency [V], and the power [Hz] and current [Ph] consumption;
-
the CE marking [9];
-
dismantle symbol [G];
3.2
Acoustic pressure level
The average equivalent continuous acoustic pressure level of this machine is quoted in the Technical Handbook (Technical
Data section). This data has been measured at 1 meter from the surface of the machine and at 1.60 meters from ground-
level, during the machine’s functioning.
4
C
ARRYING
AND
UNPACKING
Note:
We suggest you to let the Assistance Service or qualified technicians carry out the transportation,
unpacking and installation.
T
O
LIFT
THE
MACHINE
ALWAYS
USE
AN
ADEQUATE
LIFTING
DEVICE
. A
TTEMPTING
TO
LIFT
IT
MANUALLY
IS
DANGEROUS
AND
CAN
DAMAGE
YOUR
HEALTH
.
The machine’s weight specifications, both inclusive of packaging and net, can be
found in both the supplied documents and on the packaging itself.
To prevent the oil contained in the compressor to flow into the refrigerating circuit, it is neces-
sary to always keep the machine in upright position, both during carrying and during the instal-
lation and operation. Always follow the instructions on the packing.
