English
Operating instructions
7
4.1
Transportation of the packed machine
(floor models)
The packing has been projected to assure at the machine the highest protection.
It is therefore suggested to transport the machine while it is packed as near as possible
at the place where it will be installed.
To carry the packed machine, use an elevator, or a bench trolley, inserting its forks in
the basement’s holes.
4.2
Unpacking
Unpack the machine and carefully check it. In case of doubt, do not use it, and call the
Seller.
Bench top models:
-
cut holding straps, open box from the top, remove protection packaging material
and remove machine from the box.
Floor models:
-
cut the straps and remove the cardboard box from the top;
T
HE
OPENING
OF
THE
LATERAL
PANEL
IS
ONLY
ALLOWED
TO
THE
A
SSISTANCE
S
ERVICE
OR
TO
QUALIFIED
TECHNICIANS
AND
MUST
BE
MADE
BEFORE
CONNECTING
IT
. M
AKE
SURE
NOT
TO
DAMAGE
THE
INTERNAL
PARTS
OF
THE
MACHINE
.
-
Remove both the lateral panels unscrewing the relevant fixing screws [21];
-
Find and unscrew the bolts [22] which fix the machine’s frame at the packing’s basement;
The outlet of the supply cable is placed on the machine’s lower side. During the lifting make sure
not to damage it.
-
Lift the machine from the basement, possibly working on the lower side, near the wheels, and however, only on the
frame’s carrying parts. Remove the basement, and lean the machine on the floor avoiding bumps;
DO NOT insert objects, ropes or brackets for the lifting THROUGH the machine, since these
could damage the inside parts.
-
Re-close the lateral panels;
-
Replace or move the packing, which is produced with entirely recyclable materials (
).
