English
Ice cream freezer
8
5
I
NSTALLATION
T
HE
INSTALLATION
MUST
BE
CARRIED
OUT
ONLY
BY
THE
ASSISTANCE
SERVICE
OR
BY
TECH
-
NICALLY
AUTHORISED
PERSONNEL
AND
IN
COMPLIANCE
WITH
THE
LAWS
IN
FORCE
,
ALWAYS
FOLLOWING
INSTRUCTIONS
OF
THE
MANUFACTURER
.
5.1
Placing and check of the parts
Place the machine on a flat and steady surface.
Install the machine away from any source of heat, avoiding a direct exposition to sun
radiation and making sure that air can freely circulate around each side of the ma-
chine itself.
The machines with AIR CONDENSING need at least a 50 cm
free space in front of the condenser’s grill, to assure the re-
frigerating plant correct functioning. Further information are
reported on the Technical Book (Technical Data section).
Check that the following items are all included in the package:
-
lid [5];
-
beater [6], correctly fixed inside the cylinder with its knob [7] and supplied with adjustable blades [31] (1…3 according
to the model);
-
drain plug [4] (not in large-sized models which are supplied with extraction door [14]);
Also check that the following items are included:
-
spare part kit [11], tube-brush [12] and ice-cream blade [13];
-
only in large-sized models, basin support [10], knobs [16], the lever [8] and the extraction door chute [9];
-
all the
technical documentation
(in addition to this handbook): the Technical Handbook, the EC’s Conformity Certifi-
cation and Electrical Test’s Schedule.
5.2
Machine’s parts reassembling
T
HE
REASSEMBLING
MUST
BE
MADE
BEFORE
CONNECTING
THE
MACHINE
TO
THE
ELECTRICAL
SUPPLY
SYSTEM
.
-
Screw the lever [8] in the extraction door [14];
-
if the chute [9] is supplied disassembled, install it under the extraction door [14] by hooking it to the hinges [26];
-
install the basin support [10] by fixing it to the front panel with knobs [16].
