MP-16 Rear Panel
The rear panel of the unit comprises the following connectors:
Primary
Secondary
GPIO
12VDC
Line 2
In
Mic/
Line 1 In
INF-MP-16
Line 1
Out
Line 2
Out
B
E
C
D
A
DS-16 Rear Panel
E
C
B
A
D
F
Analog Inputs
(A)
Two female 3-pin XLR connectors are provided. They can be configured to accept either a mono
microphone input (left XLR only), or as a stereo line input. Phantom Power is supported when the input is
configured for microphone use.
Analog Line Outputs
(B)
Two male 3-pin XLR connectors are included which provide a +4 dBu line level output. They can be
configured to output either an audio source, assigned from the L AES67 network, or the talkback/
comms audio sent to the internal speaker. It is also possible to assign a combination of the two when the
external XLR connectors are set in dual mono mode.
GPIO
(C)
A DB-15 socket connector provides 5 GPIO Inputs and 5 GPIO Output pins. The pinout is consistent with
other Telos Alliance products. GPIO connections are user-assignable.
MP-16 AND DS-16 HARDWARE
