SECTION 6 |
32
VMIX AND VMODE
VMix Main Controls
The
VMix Main
output provides a summed mix of all 8 submixes. Unless you need a single output that combines
the audio from of all the submixes, you may leave this disabled — it doesn’t need to be enabled for the submixers to
work. There are only a few settings for this control:
♦
Out Name
- You can enter a friendly name for the VMix Main output, which will be displayed as a source
name on your Axia network.
♦
Out Stream Type
- Choose from
Live Stereo, Medium Stereo, Standard Stereo,
or leave it
Disabled
if no
Main stream is desired.
♦
The
Status
window will normally display “OK” when the stream is enabled.
♦
The
Audio
box will be green when audio is present.
VMix Submixer Controls
In most cases, the VMix Subs are the only channels you will need to enable, since each Sub has its own direct
output. Only enable Submixes you intend to actively use; active submixes without any activity clutter up your
network with empty streams.
First, you’ll want to enable the Submixer you’re working with. At the top of the section, you’ll see (in this case)
Submix 1
displayed on the screen. Next to that are controls for:
♦
Gain.
Set this at whatever output level you want the submix output stream volume to be.
♦
Channel.
All Livewire audio streams are assigned a Channel number; put a unique value in this box.
♦
Out Stream Type.
Choose from
Live Stereo, Medium Stereo,
or
Standard Stereo. Disabled
turns off the
submixer.
