Page 11
Device Status
Once the user is logged in, the following window device status window will be prompted for
viewing. It contains both the system information, networking and device information
configured for the device.
For further configuration instructions, please refer to CPE8100 user manual.
4
FAQ and Troubleshooting
1)
My PC cannot connect to the CPE.
Re-plug the PC Ethernet cable and check if the PC LAN connection is up or showing
activity.
Check if the PoE power adapter LED is on. If it is not, check the power cord and make
sure it is connected properly. Also verify that the AC power supply is available.
If the PC LAN shows no activity and PoE adapter LED is off but the power cord is
connected properly and there is AC supply, then it is likely the PoE adapter is
damaged. Please contact distributor to obtain replacement part.
2)
My PC cannot acquire IP from the CPE.
