Telstra 8100, User Manual

36

37

Phone settings

screen and the alarm melody will 
ring for 45 seconds. 
You can press any key to disable 
the alarm. If snooze function is 
activated, the alarm will sound 
again at the end of the snooze 
period of seven minutes. You 
can also press 

and hold

 to 

terminate the snooze function.

Note:

a. The alarm will turn off when the alarm 

time is reached or by pressing any key 
while the alarm is sounding (even if  
the handset keypad is locked).

b. The alarm volume level is the same 

as the settings of the handset ringer 
volume. If the handset ringer is set to 
VOLUME OFF, the alarm will sound at 
VOLUME 1 level.

c. During an external call or internal call, 

if an alarm is set and when the alarm 
time is reached, the  

 and 

ALARM ON

will fl ash on-screen. An alarm tone will 
be emitted from the earpiece to notify 
user the alarm time is reached. Once 
user presses any key or presses and 
holds 

 to disable the alarm, it will 

revert to the call duration screen.

d. During paging or ringing, the alarm 

will not sound when the alarm time is 
reached. However, if snooze function is 
enabled, the alarm will sound again at 
the end of the snooze period provided 
that it is not ringing or in paging mode 
at the end of the snooze period.

8.2.1  Turn on/off the alarm 

1. Press 

 and 

Y\

 to select 

HS 

SETTINGS

2. Press 

 and 

Y\

 to select 

ALARM

Phone settings

3. Press 

 and 

Y\

 to select 

ON/OFF

4. Press 

 to confirm.

Note: If ON is selected, you will be asked
to set the alarm time in accordance with 
paragraph 8.2.2

8.2.2  Set the alarm time (if 

the alarm is set to be 
on)

1. Follow steps 1 to 4 in Section 

8.2.1.

2. Enter the alarm time in the time 

format you set in Section 8.1.2

3. Press 

 to set the snooze 

function.

4. Press 

 and 

Y\

 to select 

ON/OFF

5. Press 

 to confirm.

8.3 Handset 

settings

8.3.1  Set the ringer melody 

for internal calls

1. Press 

 and 

Y\

 to select 

HS 

SETTINGS

2. Press 

 and 

Y\

 to select 

RING SETUP

3. Press 

 and 

Y\

 to select 

INT RING

4. Press 

 and 

Y\

 to select 

the desired ringer melody 
(5 melodies are available for 
internal calls).

5. Press 

 to confirm.

Note: Ringer melodies will be played 
when the melody is highlighted while 
browsing the melody list..