2. Connect filter/splitter to wall socket
• Plug the short cable (labelled ‘Line’) on the back of the filter/splitter into
the socket on the wall plate.
• Next, align the mounting screws on the filter/splitter with the mounting
screws on the wall plate. Then slide the filter/splitter downward until it
stops sliding and is secured firmly.
3. Connect phone to filter/splitter
• Plug the short cable on the phone into the socket on the front of the
filter/splitter that is labelled ‘Local Phone’.
• Next, align the mounting holes on the phone with the mounting screws
on the filter/splitter. Then slide the phone downward until it stops sliding
and is secured firmly.
• Finally, to connect the router to the filter/splitter, plug it into the socket
labelled ‘ADSL Router’
• The wall phone filter/splitter also includes an additional socket for other
phone devices.
11 12