7
Names and numbers to save on SIM card
Name
functionality
various
By ringing activate output A (closing time set in RTIME)
ALARM1
to
ALARM8
- By ringing activate output A (closing time set in RTIME)
- By SMS activate output A and B
- By SMS control (status, version, IMEI, credit)
- During failure on input 1(2) is send SMS from position 2(3)
and progressively ring to line of ALARMx numbers (until line
interruption)
- when power supply is disconnected for 30 sec. and more
the SMS in format 'ACCU,credit’ is sent to ALARM8 number
- when power supply is working again longer than 30 sec. the
SMS in format 'POWER ON,credit' is sent to ALARM8
number
ADMIN1
to
ADMIN8
- By ringing activate output A (closing time set in RTIME)
- By SMS activate output A and B
- By SMS control (status, version, IMEI, credit)
- By SMS edit numbers and names saved on SIM card
- By SMS control further functions (AT commands)
ARMSMS1
to
ARMSMS8
Extendig of phone numbers where are send SMS messages
from Input 1 and 2. When ARMSMS is used and SMS are
not preprogrammed, the sends SMS „INPUT1 (2)“.
ARMSMSs phone numbers „MUS NOT“ be the same as
ALARMs or ADMINs numbers !!!
CRED
- code to assure credit level
(*101# ... for T-MOBILE, *104*# ... for O2)
OPER
- GSM operator number where from coming inform SMS
(expiration time etc..). The SMS is resent to ALARM8
RTIME
- Time of closing output A after ringing (1-99sec), default
3sec
The name and numbers may be saved to SIM card phone
book by mobile phone or by PC via configuration sw. The
names ALARMx, ADMINx, ARMSMSx, CRED, OPER and
RTIME must be written by BIG characters. Between name
ALARM (ADMIN, ARMSMS) and number ( ALARM1,2…)
must not be a space. The ALARM numbers must have
voice mail switch OFF! When ALARM number is busy or
unreachable the call is picked up by voice mail and further
numbers are not ringed!
