27
Button 6 is used to change between configuration modes.
Main Buttons description:
‘Connect’ – connects device
‘Load’ – reads configuration parameters from FM3620 Flash memory.
‘Save’ – saves configuration parameters to FM3620 Flash memory.
‘Load Defaults’ – loads default FM3620 settings that later can be modified. This procedure
must be performed before entering new parameters.
‘Save to File…’ – allows user to save currently entered settings to .XML file, for later usage.
‘Load from File…’ – allows user to load configuration saved in .XML extension file.
‘Reset device’ – reboots FM3620 and displays processor firmware version.
Additional Buttons description:
‘Add Keyword’ / ‘Change Keyword’ / ‘Switch Security Off’– buttons are used to protect
configurator from unauthorized access to configuration.
Keyword is 4 – 10 symbol length. If keyword is set, every time user reconnects FM3620 to
USB port, user will be asked to provide valid keyword when connecting FM3620 to configurator.
User is given 5 attempts to enter keyword. After entering valid keyword, counter resets to 5.
If user disconnects FM3620 using ‘Disconnect’ button and does not disconnect from USB
port, after reconnecting using ‘Connect’ button, configurator does not ask for keyword.
ATTENTION! If you have entered a keyword, disconnected from the
configurator and then later connected again, you will need to enter the
keyword that you have entered previously. If you have forgotten it, please
contact your local sales manager.
5.7
Read records
When the FM3620 is working in offline mode, it can save up to 3854 records. Since these
records are not sent to the server, they can be downloaded directly to connected computer using
USB connection. When you connect FM3620 device, FM3620 Configurator appears with
additional option "Read Records” (Fig. 19).
