130
Then FM6320 must be configured. Both fuel level and fuel temperature has to be set up by
configurator’s I/O menu (see Figure ):
Figure 73 FM6320 I/O Configuration
18
GPRS COMMANDS
It is possible to send commands to FM6320 using GPRS. When FM6320 sends records
periodically to a server, a message could be sent from the server and FM6320 will reply to it.
FM6320 has to be connected to the server in order to receive commands.
Command
Description
#GET DATAORDER
Get info about records sorting parameter
#SET DATAORDERX=Y
Set records sorting parameter, X – profile, Y – value (0/1).
#GET RECTO
Get info about records refresh timeout parameter
#SET RECTO=X
Set records refresh parameter, X = records refresh timeout
#GET VERSION
Receive firmware version
#GET NETWORK
Get GSM operator to which device is connected
#GET IMSI
Get IMSI of the device
#GET OUT
Get DOUT values
#DO REPORT
Save a record
#DO RESET=XXX
Reset FM6320 or GPS module, XXX – FM5X or GPS
#GET ROAMINGX=Y
Get operator from the list of a certain profile, X – profile, Y – operator
number in a list
#SET ROAMINGX=Y,Z
Set operator to the list of a certain profile, X – profile, Y – operator
number in a list, Z – operator code
#GET REMIPX
Get IP and port number from the configuration of a certain profile, X –
profile
#SET REMIPX=Y:Z
Set IP and port number to the configuration of a certain profile, X – profile
no, Y – IP or domain, Z – port number
#GET AUPX
Get APN, user login and password from the configuration of a certain
profile, X – profile
#SET AUPX=Y,Z,W
Set APN, user login and password to the configuration of a certain profile,
X – profile, Y – APN, Z –, user login W - password
#GET REPRTX
Get MinPeriod from the configuration of a certain profile, X – profile
Summary of Contents for FM6320
Page 1: ...FM6320 User Manual V1 13...
