29
6
CONFIGURATOR
6.1
STARTUP
FM6320 configuration is performed via FM6320 Configurator program. FM6320
Configurator can be downloaded from
http://avl1.teltonika.lt/downloads/FM63/
. Contact sales
manager to get the latest FM6320 Configurator version. FM6320 configurator operates on
Microsoft Windows OS and uses MS .Net Framework 3.5 or higher. Please ensure that MS .Net
Framework 3.5 or later is installed on your PC before starting configurator. Latest MS .Net
Framework version can be downloaded from official Microsoft web page.
Module configuration is performed over USB cable or COM2. Configuration process starts
from starting FM6320 Configurator program and then connecting to FM6320 device via
“Connect” button located on the top left corner of configurator. If one of the communication
sources (USB cable or COM2) is connected to the device, the configurator will detect it
automatically and if connected successfully IMEI, Version fields, which were empty, now are
filled with certain numbers depending on Modem IMEI and firmware version of your device
(Figure 17).
Figure 17 FM6320 Configurator window
6.2
Configurator structure
FM6320 has four user editable profiles, which can be both loaded and saved to the device.
User can also revert to default settings, by pressing Load Defaults button. Any modification of
configuration settings has to be saved to FM6320 device, otherwise it will not be written to
device flash memory.
FM6320 Configurator is divided into 5 main areas (Figure 18):
a.
Buttons area;
b.
Information area;
c.
Profiles or global parameters selection area;
Summary of Contents for FM6320
Page 1: ...FM6320 User Manual V1 13...