78
To save GPRS traffic ECO driving/Green driving event will be
generated (included into
records) only
when FM6320 measured values are higher than those set in configuration, without
additional I/O settings.
To prevent generating false events, harsh acceleration and harsh braking is monitored only
when following conditions are fulfilled:
Ignition is ON
Vehicle speed is equal or higher than 10km/h
Harsh cornering is monitored only when following conditions are fulfilled:
Ignition is ON
Vehicle speed is equal or higher than 30km/h
ECO driving or Green driving Scenario?
Eco driving is based on accelerometer value and
Green driving based on GPS position.
PLEASE NOTE that Eco Driving functionality generally is dependent on
accelerometer. Device must be on plain/horizontal surface to calibrate itself
correctly. It calibrates once it is powered up.
11.1.1
Mounting Requirements
PLEASE PAY ATTENTION, that ECO driving functionality will operate correctly
only if device is mounted into the vehicle in a proper position.
ECO driving functionality operation is based on accelerometer. It is important to mount
FM6320 device correctly to avoid functionality malfunctions (first condition). In the picture
below (Figure 52) mounting recommendations are displayed. Please
note
that beside those
recommendations
1.
You can choose how FM6320 is deployed. It means that that there is no effect to
measurements if FM6320 top/bottom side points up or down.
2.
Device can be deployed at any place in the car.
Summary of Contents for FM6320
Page 1: ...FM6320 User Manual V1 13...
