92
12.13
getinfo
Table 46 getinfo
Response details
Description
INI
Device Initialization Time
RTC
RTC Time
RST
Restart Counter
ERR
Error Counter
SR
Number of Sent Records
BR
Number of broken records
CF
Profile CRC Fail counter
FG
Failed GPRS counter
FL
Failed link counter
UT
UPD Timeout counter
P#
Current profile
#;#;#;#;#
# - how many times appropriate profile ( Profile0; Profile1; Profile2;
Profile3; Profile4 ) was loaded
SMS
Sent SMS Counter
NOGPS
No GPS Timer
GPS
GPS receiver state. 0 – OFF, 1 – restarting, 2 – ON but no fix, 3 – ON and
operational, 4 – sleep mode
SAT
Average satellites
RS
Reset Source Identification
RF
Number of records found on FLASH
Answer Example: INI:2007/8/24 10:15 RTC:2007/8/24 12:43 RST:2 ERR:11 SR:182 BR:0 CF:0
FG:0 FL:0 UT:
P:1;0;1;0;0;0 SMS:2 NOGPS:0:0 GPS:3 SAT:7 RS:7 RF:11
12.14
deleterecords
Deletes all saved records from device memory. Device does not send a response back to
the sender.
12.15
readio #
Table 47 readio #
Response details
Description
ID
IO element ID
Value
IO Element value
Answer Example: IO ID:3 Value:0
12.16
setdigout #### X Y Z W
Sets digital outputs to ON or OFF state (for some time if needed). Value is written as a row
for OUT1, OUT2, OUT3, OUT4 values.
Example: ‘setdigout 0010 0 0 5 0’ will set OUT3 to high level for 5 seconds, while OUT1,
OUT3 and OUT4 to low level.
Ans. example: “DOUTS are set to:0010 TMOs are: 0 0 5 0. Out1 Scenario: Enabled Out2
Scenario: Disabled"
Summary of Contents for FM6320
Page 1: ...FM6320 User Manual V1 13...
