97
13.2
Configuration
Manual CAN data can be configured using “Manual CAN” in CAN tab, figure below (Figure
Figure 59 CAN configuration window
CAN message ID type
: Message ID type (Figure 60 CAN message ID types6) two types
according to SAEJ1939 standard: Standard ID (value: 0 to 0x7FFh) and Extended ID (value: 0 to
0x1FFFFFFFh).
Figure 60 CAN message ID types
Message ID value is entered in hex format. This parameter is used to configure hardware
message filter (Figure 61). All messages contain 8 bytes of data, to select particular data/bytes
“Output Data Mask” is used, it’s done by ticking required bytes, only selected bytes are sent to
server.
Figure 61 CAN message filter configuration
Summary of Contents for FM6320
Page 1: ...FM6320 User Manual V1 13...