12
POWER
Input voltage range
10-30 V DC with overvoltage protection
Back-up battery
1200 mAh Li-Ion battery 3.7 V (4.44 Wh)
Internal fuse
3 A, 125 V
Power consumption
At 12V < 6 mA (
At 12V < 6.5 mA (
At 12V < 12 mA (
At 12V < 35 mA (nominal with no load)
At 12V < 1.5 A Max. (with full Load/Peak)
BLUETOOTH
Specification
4.0 + LE
Supported peripherals
Temperature and Humidity sensor
, Inateck Barcode Scanner,
Universal BLE
sensors support
INTERFACE
Digital Inputs
2
Digital Outputs
2
Analog Inputs
1
CAN Adapter inputs
1
1-Wire
1
RS232
1
Integrated buzzer
1
GNSS antenna
Internal High Gain
Cellular antenna
Internal High Gain
USB
2.0 Micro-USB
LED indication
2 status LED lights
SIM
Dual SIM
Memory
128MB internal flash memory
PHYSICAL SPECIFICATION
Dimensions
77.30 x 63,30 x 19,20 mm (L x W x H)
Weight
70.4 g
OPERATING ENVIRONMENT
Operating temperature
(without battery)
-40
°C to +
85
°C
Storage temperature (without
battery)
-
40 °C to +85
°C
Operating humidity
5% to 95% non-condensing
Ingress Protection Rating
IP41
Battery charge temperature
0 °C to +45 °C
Battery discharge temperature
-
20 °C to +60 °C
Battery storage temperature
-
20 °C to +45 °C for 1 month
-
20 °C to +35 °C for 6 months
FEATURES
Sensors
Accelerometer
Scenarios
Sleep modes
Configuration and
firmware update
(Configuration)
SMS
Configuration, Events, DOUT control, Debug
GPRS commands
Configuration, DOUT control, Debug
Time Synchronization
GPS, NITZ, NTP
Fuel monitoring
Ignition detection
Digital Input 1, Accelerometer, External Power
Voltage, Engine RPM (CAN Adapters, OBDII dongle)
RS232
Log Mode, NMEA, LLS, LCD, RFIH HID/MF7, Garmin
FMI, TCP ASCII/Binary, Magnetic card reader
