Teltonika TeltoCharge, Quick User Manual

When the TeltoCharge device is configured, your app screen should 

feature the following information:

   Charger type:

 the image of your TeltoCharge device  should be 

displayed.

   Connection status: 

the status “

Available

” should indicate that the 

TeltoCharge device is connected to your smart device through a 
Bluetooth connection. The status "

Not Available

", should indicate that 

the charger is out of Bluetooth range or there is another issue (see 
“Troubleshooting”).

   Charger name: 

by default, the charger’s name is "TeltoCharge". 

However, you can edit.

In case you have more than one device, swipe right to add a new one.

Note:

 To connect TeltoCharge to your WiFi network 

you must first connect your charger to Bluetooth. 

Quick User Guide

TeltoCharge

6

5. My TeltoCharge device

6. Connect TeltoCharge to a WiFi network

1.

 Tap the gear        in the top right 

corner to go to the Settings menu.

2.

 Select “

Connectivity

” and then 

select “

WiFi

”.

3.

 Enable the WiFi toggle to activate the 

WiFi connection. Wait several seconds 
until the network list appears.

4.

 From the network list, tap on your 

network and enter your network 
password when prompted. It can take 
some time to establish a WiFi 
connection.

5.

 After the WiFi connection is 

established, you will see the network 
you have connected to.

Note: 

To connect to WiFi please enter the password 

of your home WiFi.

9:41