6
Figure 9 Completely closed device
Figure 8 Attaching cover back
Figure 6 SIM card insert
Figure 7 Battery connection
Figure 5
Cover removal
Figure 4
Partly closed device
Set up your device
How to insert Micro-SIM card and
connect the battery
1.
You will receive your device partly closed.
2.
Gently remove
top and bottom covers
.
3.
Insert
SIM
card as shown with
PIN request disabled
or read
. Make
sure that Micro-SIM card
cut-off corner
is pointing outward
from slot.
SIM slot 1
is closer to PCB,
SIM slot 2
is the top one.
4.
Connect
battery
as shown to device. Position the battery in
place where it does not obstruct other components.
5.
After
configuration
, see “
”, attach
device
top
and
bottom
cover
back and press them twice to the
full closure.
6.
Make sure that product casing is closed correctly.
IMPORTANT!
This device has an IP67 casing with a two-phase closing, that
ensures reliable protection and ease of use. Please make sure that product
casing corner clips are fixed tightly and cable is connected to the device in order
to maintain the degree of IP67 protection.
