Voice/Fax Programming
The
Telular Device Manager
allows you to program all the voice and fax options for service on
your SX7T.
1.
From your Web browser, launch the Telular Device Manager. (See
“Using the Telular
Device Manager”
on page 6.)
2.
From the home page, click
PSTN
(1)
.
3.
Click
Basic
,
Call Control
, and
POTS Setup
(2)
to display the programming pages (see
“PSTN Options”
on page 36 for examples of each page).
4.
Select your desired settings (see table below), click
Save
(3)
, and then click
Restart
(4)
to
save the settings to your SX7T.
PSTN Settings
Basic
MT Call Type
Select a setting for the phone jack:
Voice Always
to use the jack for voice calls only (default
setting).
FAX Next Call
to set the jack to send or receive a fax
with the next call (reverts to previous setting after call).
FAX Always
to use the jack for fax calls only.
Data Next Call
to set the jack to send or receive Circuit
Switched Data (CSD) with the next call (reverts to
previous setting after call).
Data Always
to set the jack for CSD data calls only.
TTY Mode
Allows the unit to be used with TTY (TeleTypewriter)
devices for the deaf or hard of hearing. Modes include
TTY VCO
(voice carry over),
TTY HCO
(hearing carry
over), and
TTY Only
.
33
44
11
22
Voice and Fax Options (SX7T Only)
Wi PATH
TM
SX7
19
User Guide
