Network > Firewall/Filters
The
Firewall/Filters
settings allow you to customize the following access settings for the SX7
on your network.
Firewall (SPI):
Select
Enable
to use the SPI (Stateful Packet Inspection) firewall to monitor
network connections and reject any that do not match its criteria.
LAN Port Filter Range:
Select an option (see below) and a range (from 0 to 65535) of
ports through which to allow connections.
●
Disable:
Do not apply a LAN port filter range.
●
Both:
Use both TCP and UDP port numbers for filtering.
●
TCP:
Use only TCP (Transmission Control Protocol) port numbers for filtering.
●
UDP:
Use only UDP (User Datagram Protocol) port numbers for filtering.
LAN IP Filter:
Select
Enable
and either
Only Allow IP Addresses on the List
or
Only
Deny IP Addresses on the List
to allow or deny connections with specific IP addresses.
Click
Edit IP Filter List
to enter the IP addresses to allow or deny (up to 50).
LAN MAC Filter:
Select
Enable
and either
Only Allow MAC Addresses on the List
or
Only
Deny MAC Addresses on the List
to allow or deny connections with specific MAC
addresses. Click
Edit MAC Filter List
to enter the MAC addresses to allow or deny (up to 50).
IPSec Pass Through:
Select
Enable
to allow connections to pass through IP Security.
PPTP Pass Through:
Select
Enable
to allow connections to pass through Point-to-Point
Tunneling Protocol.
Advanced Data Connection Options
Wi PATH
TM
SX7
29
User Guide
