36
Troubleshooting your Optik TV system
problem
possible solution
Cannot turn on my Optik TV digital box
Try pressing the front panel power button on your digital
box .
Make sure that all your power cords are completely
inserted into a power outlet .
Ensure that your TV set is plugged into a working power
outlet .
If the Optik TV digital box is plugged into a power bar or
surge protector, make sure that the power bar is on and
has not tripped . If it has tripped, press the reset button
on the power bar to restore power .
If the digital box is connected to a switched electrical
outlet, make sure that the switch is on .
If the green LED light at the front of the Optik TV digital
box lights up, your box is now on and working .
The Optik TV digital box does not initialize
Check to ensure that your modem or router is operating
and that all cords are properly connected .
Turn the power on the digital box off and on .
No picture or poor picture quality
Check to ensure that your TV is set to the right video
input .
Ensure that the TV channel is set to the appropriate
channel to match the settings on your Optik TV digital
box and VCR/DVD (Video 1, 2, etc .) .
Check the back of your Optik TV digital box and any
additional devices to ensure that all of the cables are
firmly connected .
Make sure that all the connections are made according
to the appropriate configuration for your particular
requirements .
Optik TV digital box does not respond
to my remote control unit
Check the batteries in your remote .
Press the TELUS STB button at the top of the remote .
Change channels using the buttons on your digital box .
If this works, check the remote control batteries .
Note if the buttons light up when you press them . If not,
check the remote control batteries .
If your remote control works with your Optik TV
digital box but not with your TV or VCR/DVD, try
re-programming the remote control using the codes
in the remote control user guide available on
telus.com/tvhelp
.
Ensure that there is a clear path between the remote
control and the equipment . If necessary, clean the
infra-red receivers on the equipment .
Summary of Contents for Optik TV
Page 48: ......