4K UHD All-in One Video Camera
A/M:
Auto frame/Manual frame.
PUSH Frame:
In Auto frame off mode, you can manually trigger the Auto frame once.
Preset key:
Long press for 3 seconds to save the current position to the corresponding preset position, shortly
press to call the preset position, only available when Auto frame is closed.
Mirror /Flip:
Reset:
Press and hold for 3S to reset the camera parameters to the factory settings.
Digital key reuse:
As shown in the figure on the right, in non-menu mode, this part of the key is used for the function
identified on the key; in menu mode, this part of the key is used as a numeric key.
OSD menu
1. In normal working mode, press the menu button
on the IR remote, to enter the
OSD menu; press the menu button again to exit and save modified parameters.
2. Use the navigate button to select the main menu. As above picture, once been
selected, the main menu will change to grey color background, and the right side will
show all parameters under this sub menu.
3. When enter into the main OSD menu, press the up/down navigate button to select
the sub menu, use left/right navigate button to set the parameter.
4. If you need to return back the last level menu, select the “return” and then press the
left or right navigate button to get back to previous menu.
5. Press OSD button
again to exit the menu.