telylabs telyHD, Quick Start Manual

5

Plugging in your telyHD

1

  Connect to the TV or AV receiver

First, plug the smaller end of the HDMI 
cable into the port labeled 

on your telyHD. 

Next plug the larger end of the HDMI  
cable into an open HDMI (IN) port on  
either your 

A

 TV or your 

B

 AV receiver  

as shown at right. 

If in doubt, plug the HDMI cable directly  
into your TV as shown in option 

A

. 

2

Connect to the Internet

Wired: 

(recommended)  

Connect one end of an Ethernet cable (not 
included) directly to your router and plug 
the other end of the cable into the Ethernet 
port labeled 

 on your telyHD.

Wi-Fi: 

(alternate)

If you want to connect via Wi-Fi, skip this 
step for now. You will be able to configure 
your Wi-Fi settings later in the process.

3

Connect to power

Plug the included power adapter into a 
power outlet, and plug the other end into 
the   power port on your telyHD. This 

will automatically start your telyHD.  

 International Use: Your telyHD’s power adapter will work 

worldwide and can accommodate from 110 to 240 volt. If you 
are outside the USA, you may need a plug adapter to fit into the 
power outlet used in your country.

or

Power

Broadband

Ethernet

AV receiver

tely

HD

TV

B

A

Get r

eady

Setup

Make a call

Mor

e info