TEMA TELECOMUNICAZIONI
AD639R VoIP SIP PoE Repeater
MAS-AD639R-REV00EN
Page 19 of 30
9.6. Messages management
In this window it is possible to change/listen to the messages for “Calling”, “Alarms”, “Announcement” and “Ringer”.
Memory contains a default message for each position, the user can change any of them and the messages format
must be WAV PCM 8 kHz, 16 bit, mono.
The "Alarm Notify Msg 1" is reproduced towards the programmed telephone: when the called person answers, the
message is reproduced several times until the acknowledgment code is entered or a timeout expires. "SIP Alert
Call Button" function.
The "Ann. Alarm 1" message is reproduced on the local loudspeaker when the relative option is active in the alarm
programming screen (par. 9.5) and when the corresponding input is activated. The message is broadcasted before
making a call to a telephone.
Finally the "Night Ringer" message is the one reproduced during the general night call (par. 9.4).
Audio Multicast Streaming
By enabling this feature, AD639R will listen to the specified address/port, and can reproduce on its speaker any
received audio streaming. This function has a lower priority than the normal telephone operation of the system
(outgoing or incoming calls will block or prevent the reproduction of the audio stream).
It is possible to program the volume of the Multicast audio, normally it will be low if the system is used to play
background music or higher if it is used for the broadcast of announcements (for example in combination with a
Tema AD696/BM microphone base).
