Troubleshooting
If problem arise, refer to the following before requesting repair service.
Common Problem
Check point
●
Electric power does
not turn ON
●
Battery is fully charged.
●
Power/Pairing Button is pushed 3 to 6
seconds.
●
Other party’s voice is
inaudible.
●
Pairing process with mobile phone is completed.
●
The headset is connected to your mobile phone.
●
Volume level is adjusted to an audible level.
●
Volume level of the mobile is properly adjusted.
●
Other party’s voice is
hardly audible.
●
Volume control is properly adjusted.
●
Volume control of the mobile is properly adjusted.
●
Other party can not
hear you.
●
Pairing process with the mobile is completed.
●
The headset is connected to your mobile phone.
●
Too noisy or windy environment.
●
Your mobile phone
does not recognize the
headset at pairing
process.
●
The Power/Paring button is pushed for more
than 6 seconds.
●
Pairing process is
completed but there is
no connection with the
mobile phone.
●
Wrong Bluetooth equipment is selected when
setting the mobile phone.
●
When a call is made on
the mobile, there is no
automatic connection
with the headset.
●
Some mobile are not automatically connected.
To connect, push the volume button from 3 to 6
seconds.
【
Attention
】
Lower battery indicates fast flashing twice as the time of slow blinking
in a standard mord.
（
Blue indicator
⑤）
. You can also hear beaping
sounds from the speaker while internal blinking. Please recharge the
battery if the light flases accordingly this.
＊
Standard mode
＊
Lower Battery mode
●
●
●
●
●
●
→
●
● ●● ●
●
● ●● ●
→
9
