User Guide - Temp
ilot
-H
8
(Multi-use)
Temperature & Humidity Data Logger
MARK
REC
DAY(S)
HR(S)
MIN(S)
REC
STOP MARK
MARK
REC
MARK
REC
MAX MIN AVG MKT
MARK
MARK
REC
READY
READY
I. Inspecting the Logger
II. Start the Logger
III. Mark and View in Transit
IV. Stop the Logger
V. Get the Reports
USB Interface
View/Mark
Start/Stop
Temp
ilot
(H:)
START
/STOP
VIEW/MARK
MARK
REC
Data Report
Temp Summary
℃
Share
ST
ART
/S
TO
P
VI
EW/M
ARK
MARK
REC
X
CSV
START/STOP
VIEW/MARK
HS
MARK
REC
www.etomatoes.com
RH
MARK
REC
Temp
ilot
-H
8
(multi) could monitoring both temperature & humidity.
Without
installing
any software, end-user could quickly acquire detailed data reports in both
PDF and
CSV format.
Single press any button or to wake the device, “
READY
” means logger is OK for a start.
The battery indicates the power of the logger.
Full power, easy using.
Low power, not suggest using, be aware the device
may possibly stop during monitoring.
Empty power, cannot be started.
Press and hold “START/STOP” button for more than 4 secs until the “
CLOCK
”
icon appears then release the button within 2 secs, once see the clock
flashing indicates start successfully. After delay ends, the device will record, and
the LCD will turn to “
REC.
” automatically.
Hi: Start-delay means a period that device is starting/working but not recording
after delay passed the device will start recording automatically. In other words,
when you see the clock flashing or “REC” both means start successfully.
If the logger doesn’t programme a “start-delay”, the LCD will show
“REC.”
directly, which means start successfully and is recording now.
Device programmed a start-delay:
Device not programmed a start-delay:
Temp
ilot
loggers provide an option that user could double press “VIEW/MARK ” button to mark an
event at any time during the logger recording period; the mark will show in the report, the number
MARK
beside the indicates the times that has marked, the maximum mark is times.
This optional function mostly used for some important events or urgent matters happen.
Single-press “VIEW/MARK” button to check the time has been recording and the
MIN / MAX / AVG
/ MKT
temperature and humidity since recording. (Single-press shows in turn)
The example shows: The logger has been recording 10 days 20hrs 30mins.
Press and hold “START/STOP” button for more than 4secs until the “
CLOCK
” icon appears , then
release the button within 2secs to stop, then LCD will show “
STOP
” which indicates stop successfully.
Hi: To Start or Stop the device: when hold and press the START/STOP button, a clock will show firstly;
Release the pressing means execute the action. If continue pressing, the clock will disappear shortly
afterwards which means cancel the action.
Note:
if the logger is not stopped manually, the device will continue to record the data until it is plugged into
a USB port on a PC or until the programmed trip length is reached.
Connect the unit to PC, and the LCD will show the progress % of generating. Once the progress reaches
100%
the file generating process is complete, then a flash disk named “Temp
ilot
” will pop up automatically
with data reports. Also via an OTG line user could acquire the reports through an Android Smartphone.
Hi: Please do not pull off the logger during the process of generating!
Tempilot
