Rev. 11/10/00
40
8. An acceptable Loop Current test level would read:
a) 23 to 30 mA
b) 60 to 80 mA
c) above 90 mA
d) below 20 mA
9. Loop current is inversely proportional to resistance, therefore as resistance
increases, the loop current measured on a pair:
a) decreases
b) increases
c) remains constant
d) is not affected
10. With multiple load coils in a circuit, each load coil detected gives the same
amount of sweep on the meter before the test automatically recycles.
T
F
