background image

 

2

 

Important Safety Information

 

 
 
Please keep this manual in a safe place for easy reference. 

 

 
1.  It is important to read this entire manual before assembling and using the equipment. 

Safe and effective use can only be achieved if the equipment is assembled, maintained and used 
properly. 
It is your responsibility to ensure that all users of the equipment are informed of all warnings and 
precautions. 
 

2.  Before starting any exercise program you should consult your doctor to determine if you have any 

medical or physical conditions that could put your health and safety at risk, or prevent you from using 
the equipment properly. Your doctor’s advice is essential if you are taking medication that affects 
your heart rate, blood pressure or cholesterol level. 
 

3.  Be aware of your body’s signals. Incorrect or excessive exercise can damage your health. Stop 

exercising 
if you experience any of the following symptoms: pain, tightness in your chest, irregular heartbeat, 
extreme shortness of breath, lightheadedness, dizziness or feelings of nausea. If you do experience 
any of these conditions you should consult your doctor before continuing with your exercise 
program.  
 

4.  Keep children and pets away from the equipment. The equipment is designed for adult use only. 

 

5.  Use the equipment on a solid, flat level surface with a protective cover for your floor or carpet. To 

ensure safety, the equipment should have at least 0.5 metres of free space all around it. 
 

6.  Before using the equipment, check that the nuts and bolts are securely tightened and that the guards 

are fitted properly. Do not use if guards are damaged or broken. 
 

7.  The safety of the equipment can only be maintained if it is regularly examined for damage and/or 

wear and tear. 

 
8.  Always use the equipment as indicated. If you find any defective components while assembling or 

checking the equipment, or if you hear any unusual noises coming from the equipment during use, 
stop immediately. Do not use the equipment until the problem has been rectified.   

 
9.  Wear suitable clothing while using the equipment. Avoid wearing loose clothing that may get caught 

in the equipment or that may restrict or prevent movement. 

 
10. The equipment has been tested under class H.C.Maximum weight of user: 130kg. Braking ability is 

independent of speed. 

 
11. The equipment is not suitable for therapeutic use. 
 
12. Care must be taken when lifting or moving the equipment so as not to injure your back. Always use 

proper lifting techniques and/or seek assistance if necessary. 

 
13. Do not use bike without properly fitted guards as this may result in injury, especially to children, due 

to shear, crushing and drawing in hazards. 

 
 
 
 
 

Summary of Contents for TP-U2200















Reviews: