OPERATION MENU’S
6.1.2
Start on another recipe STEP (status= YES / NO)
To change access/status of ‘starting on another recipe step’ in YES or NO. To allow jumping
to another step in a running process recipe set status to ON. Disabling this feature is done by
selecting this menu item again.
YES
To make it possible to jump to another step in the recipe.
NO
It is not allowed to jump to another recipe step.
CAUTION
Jumping to a wrong process step may cause serious danger.
6.1.3
Buzzer (status= ON / OFF)
The buzzer gives a continuous audible signal to alert users for alarms and an intermittent
audible signal for operator warnings.
The buzzer can be completely switched off with this menu item. Alarms will still be visible in
the bottom line of the touchscreen.
ON
Every time an alarm appears on the TOUCHSCREEN, the buzzer will give
a sound. By touching the
screen the alarm will stop.
OFF
An alarm will only appear on the TOUCHSCREEN. The buzzer will not
give any sound during the whole process/recipe.
6.1.4
Set Date and Time
Figure 6-5 Set Date and Time
Enter the correct values; use the numeric keys on the right. Press <RETURN> to confirm or
<ESCAPE> to discard the changes and return to the “System Control Menu”.
Press <ESCAPE> to exit the menu until the Main Menu is displayed. Do not forget the
System Master name and password, because entry to the access control menu is no longer
possible without them.
T
OUCHSCREEN
R
EFERENCE MANUAL
6-5
