background image

UM-ALPHA-140821 REV.D

warranties to the end user purchaser, but TempSen, in so far as permitted by la

w, provides their products “as is”. Software distributed by 

TempSen with or without the TempSen brand name (including, but not limited to system software) is not covered under this Limited 

Warranty. Refer to the licensing agreement accompanying the software for details of your rights with respect to its use. 

TempSen does not warrant that the operation of product will be uninterrupted or error-free. TempSen is not responsible for the damage 

arising from failure to follow instructions relating to the product

’s use. 

This warranty does not apply: (a) to consumable parts, such as batteries, unless damage has occurred due to a defect in materials or 

workmanship; (b) to cosmetic damage, including but not limited to scratches, dents, and broken plastic on ports; (c) to damage caused 

with non-TempSen products; (d) to damage caused by accident, abuse, misuse, flood, fire, earthquake, or other external causes; (e) to 

damage caused by operating the product outside the permitted or intended uses described by TempSen; (f) to damage caused by service 

(including upgrades and expansions) performed by anyone who is not a representative of TempSen or TempSen Authorized Service 

Provider; (g) to a product or part that has been modified to alter functionality or capability without the written permission of TempSen; or (h) 

if any TempSen serial number has been removed or defaced. 

IMPORTANT: DO NOT OPEN THE HARDWARE PRODUCT. OPENING THE HARDWARE PRODUCT MAY CAUSE DAMAGE THAT IS 

NOT COVERED BY THIS WARRANTY. ONLY TEMPSEN OR AN AUTHORIZED SERVICE PROVIDER SHOULD PERFORM SERVICE 

ON THIS HARDWARE PRODUCT. 

Revision History 

Revision 

Date 

Details 

03/16/2015 

Battery life for single use alpha logger changes to deduct 1 day each  calendar 

day after recording started. 

07/06/2015 

Added caution for saving auto PDF report 

Summary of Contents for Alpha T30


























Reviews: