Quick Guide
TempSen
®
ITAG
®
3 Series Temperature Recording Labels
Actions
LED Sequences
Start Recording
&
flash in turn for 3 times
During Recording
-No Alarm-
flashes every 10 seconds
During Recording
-Alarmed-
flashes every 10 seconds
Stop Recording
&
flash for 3 times
After Stopped
-No Alarm-
flashes 2 times every 2 seconds
After Stopped
-Alarmed-
flashes 2 times every 2 seconds
Connecting to PC
&
become solid.
lights off 1 second after connected
indicating processing data.
1> Overview
2> Operation Instructions
4> LED Indication
5> Important Information
©2015. All rights reserved, TempSen Electronics Company
T: +86 21 6768 5210 F: +86 21 6768 5232 E: info@tempsen.com W: www.tempsen.com
3> Battery
Battery Expiry Date (EXP Date) is printed on the rear side of
each logger, ITAG3 may stop recording if it's used later than
EXP Date, so please check EXP Date every time starting an
ITAG3 to avoid recording failure.
QG_ITAG3_150327_EN_CN REV. A
Water Proof
Packaging
LED Indicators
USB Connector
Start Recording
Press button and hold for 5
seconds to start. LEDs flash in turn
for 3 times indicating data logger
successfully starts recording.
Take off the serial number
sticker for the record purpose.
Press button and hold for 5
seconds to manually stop
recording, then tear open
package to expose the USB plug.
Logger also would stop recording
after running out preset logging
cycle.
Plug ITAG3 data logger into USB
port of PC.
a) You could download data
from
ITAG3 Pro
by copying PDF
data report from removable
storage device
TempSenDisk.
b) You also could download
ITAG3 and ITAG3 Pro logger using
TempCentre software.
Please download TempCentre
from www.tempsen.com
1
Serial Number Sticker
Stop Recording
Download Data
2
3
4
To avoid unnecessary loss to your goods, please do
not use the data logger without LED response after
started.
TempSen warrants this TempSen-branded hardware product against defects in
materials and workmanship under normal use for a period of ONE (1) YEAR from the
date of retail purchase by the original end-user purchaser (“Warranty Period”). If a
hardware defect arises and a valid claim within the Warranty Period, as its option
and to the extent permitted by law, TempSen will either (1) repair the hardware
defect at no charge, using new parts or parts equivalent to new in performance
and reliability, (2) exchange the new product with a product is new or equivalent
to new in performance and reliability and is at least functionally equivalent to the
original product, or (3) refund the purchase price of this product. TempSen may
request that you replace defective parts with new or refurbished user-installable
parts that TempSen provides in fulfillment of its warranty obligation. A replacement
product or parts, including a user-installable part that has been installed in
accordance with instructions provided by TempSen, assumes the remaining
warranty of the original product or ninety (90) days from the date of replacement
or repair, whichever provides longer coverage for you. When a product or part is
exchanged, any replacement item becomes your property and the replaced item
becomes TempSen’s property. Parts provided by TempSen in fulfillment it’s warranty
obligation must be used in products for which warranty service is claimed. When
a refund is given, the product for which the refund is provided must be returned to
TempSen and becomes TempSen’s property.
EXCLUSIONS AND LIMITATIONS
This Limited Warranty applies only to the hardware product manufactured by or for
TempSen that can be identified by the “TempSen” trademark, trade name, or logo
affixed to it. The Limited Warranty does not apply to any non-TempSen hardware
product or any software, even if packaged or sold with the TempSen hardware.
Manufacturers, suppliers, publishers, other than TempSen, may provide their own
warranties to the end user purchaser, but TempSen, in so far as permitted by law,
provides their products “as is”. Software distributed by TempSen with or without the
TempSen brand name (including, but not limited to system software) is not covered
under this Limited Warranty. Refer to the licensing agreement accompanying the
software for details of your rights with respect to its use.
TempSen does not warrant that the operation of product will be uninterrupted or
error-free. TempSen is not responsible for the damage arising from failure to follow
instructions relating to the product’s use.
This warranty does not apply: (a) to consumable parts, such as batteries, unless
damage has occurred due to a defect in materials or workmanship; (b) to
cosmetic damage, including but not limited to scratches, dents, and broken plastic
on ports; (c) to damage caused with non-TempSen products; (d) to damage
caused by accident, abuse, misuse, flood, fire, earthquake, or other external
causes; (e) to damage caused by operating the product outside the permitted or
intended uses described by TempSen; (f) to damage caused by service (including
upgrades and expansions) performed by anyone who is not a representative of
TempSen or TempSen Authorized Service Provider; (g) to a product or part that has
been modified to alter functionality or capability without the written permission of
TempSen; or (h) if any TempSen serial number has been removed or defaced.
IMPORTANT: DO NOT OPEN THE HARDWARE PRODUCT. OPENING THE HARDWARE
PRODUCT MAY CAUSE DAMAGE THAT IS NOT COVERED BY THIS WARRANTY. ONLY
TEMPSEN OR AN AUTHORIZED SERVICE PROVIDER SHOULD PERFORM SERVICE ON
THIS HARDWARE PRODUCT.
6> Warranty
Please call us at +86 21 6768 5210 or send email to
support@tempsen.com for technical assistance.
a) To avoid damaging your ITAG3 data logger, please do not
disconnect it from USB port while it is communicating with the
computer.b) Data stored in ITAG3 data logger is retrievable even
battery runs out. c) ITAG3 data logger uses CR2032 lithium battery,
please do not heat, microwave or recharge it. d) Please follow local
regulations when recycling or disposing of ITAG3 data logg
ers.
