.31.
INSTRUCTION MANUAL
SOMPRO120SRB AND SOM180DRB
IMPORTANT INFORMATION
We recommend that you secure the racks in place using adhesive tape to prevent causing damage
when handling the appliance and store all removed parts carefully.
1.
Remove the Hole Cover and Upper Hinge Cover on top side using a flat-head screwdriver.
Remove the Upper Hinge by unscrewing the Hex Head Srews (4pcs). Now carefully lift the Door
off the Bottom Hinge with your assistant and gently set it aside. It is important to keep the
Hinge Washer
on the top of Bottom Hinge for re-installation.
Hole Cover
Upper Hinge Cover
Hex Head Screw (4pcs)
Upper Hinge
Door
2.
Move the Hinge Hole Cap (at the top of the door) from the left side to the right side. Move the
Pivot Hinge (at the bottom of the door) from the right to the left side.
Pivot Hinge
Hinge Hole Cap