.37.
INSTRUCTION MANUAL
Adjusting the plint for SOMX15SRB
T
he plinth/grille for this appliance comes with an adjustable section. The process
for adjusting the plinth trim is simple and is achieved by following the steps
below. Perform these steps once the appliance is standing on all four feet and do
not put weight on the plinth.
1. Loosen the two screws on each side of the plinth trim (four altogether - Fig. 17).
2. Carefully guide the front trim down until the desired height is achieved. Tighten
the screws.
23
8. Adjust the wine cooler feet so that you achieve the desired height
for the cooler. If needed, re-attach the extendable plinth section with
the four screws that were removed in step 2. Stand the wine cooler
up steadily - if the extendable section will foul the floor or similar,
remove it.
Allow the wine cooler to stand for 24 hours before
plugging it in
. This will help to prevent damage to the system.
Adjusting the plinth
The plinth/grille for this appliance comes with an adjustable section.
The process for adjusting the plinth trim is simple and is achieved by
following the steps below. Perform these steps once the appliance is
standing on all four feet and do not put weight on the plinth.
1. Loosen the two screws on each side of the plinth trim (four
altogether - Fig. 17).
2. Carefully guide the front trim down until the desired height is
achieved. Tighten the screws.
Fig. 17
You can find Norwegian, Swedish, Finnish and Danish user manual from below
website.
1.
You can download
Norwegian user manual at https://temptech.no/manualer-og-
installasjon/
2.
You can download
Swedish user manual at https://temptech.se/manualar-och-
installation
3.
You can download
Finnish user manua at https://temptech.fi/kayttoohjeet-ja-
asennus/
4.
You can download
Danish user manual at https://temptech.dk/brugervejledning-
og-installation/
We take reservations about typing faults and if any problems occure, please contact
us at service@temptech.no.
OTHER LANGUAGE USER MANUAL