77
E
Extras
1. Signal-strength display
Within the sub-menu „Extras“ in the main menu you can select the signal
strength display.
The signal strength is then indicated as a vertical bar. The C/N value will indicate
the same value in dB. The higher the number, the better the reception quality. In
satellite mode, and depending on the channel, a satisfactory TV picture should be
received with any value above approx. 8. In DVB-T (optional) mode, a C/N value
above approx. 15 will provide interference-free reception.
The three coloured fi elds next to the bar indicate the status of the receiver stages.
Only if all fi elds are green, will valid data be received with the signal and a picture
be shown on screen. Use P+/P- to change the selected program in the background.
Press INFO to display an enlarged version of the C/N-value window.
Pressing the INFO button on your remote control enlarges the display of the signal
strength.
Note:
Further to the setting of your reception system and your position within the
satellite‘s footprint, the signal strength also depends on the currently selected
channel. Please take this into account when checking the aim of your antenna using
the signal strength display. It is normal that some channels are received with a
strong signal while others are rather weak.
