En
18
• activate the appliance: press the safety button (5) and
simultaneously slide down the 0-I switch (4) to the I position
• gently slide the roller (forward
and backward, right and left) on
the relative areas (corns, hard
skin) for 2-3 seconds
• switch the appliance off and verify the softness following the
treatment. If it is not sufficient, activate the appliance once
again and pass over the area according to the instructions
in the previous point
• and verify once again. If necessary, continue to treat the
area until the desired softness is achieved
IMPorTanT!
do not apply excessive pressure on the treated
area! For enhanced protection, the appliance
is equipped with a sensor that automatically
stops the roller from rotating in the case of
excessive pressure
If the skin becomes irritated, inflamed or red,
do not continue the treatment.
• switch the appliance off: press the safety button (5) and
simultaneously slide up the 0-I switch (4) to the 0 position
1
3
2
2A
2B
7
6
8
4
5
9
MI000939_IT-EN.indd 18
6/19/12 3:53 PM
