Wireless Modem Router User Guide
- 66 -
Add button. The Remove button will remove the grouping and add the ungrouped interfaces to the Default group. Only
the default group has IP interface.
Click
Add
to enter the screen below:
Group Name:
The name of a configured rule.
WAN Interface used in the grouping:
WAN connection to which the interface grouping rules apply.
Available LAN Interfaces:
LAN interfaces that can be used for interface grouping.
Grouped LAN Interfaces:
LAN interfaces that use specified WAN interface.
To create a new interface group:
1.
Enter the Group name and the group name must be unique and select either 2. (dynamic) or 3. (static) below:
2.
If you like to automatically add LAN clients to a WAN Interface in the new group add the DHCP vendor ID string.
By configuring a DHCP vendor ID string any DHCP client request with the specified vendor ID (DHCP option 60)
will be denied an IP address from the local DHCP server.
3.
Select interfaces from the available interface list and add it to the grouped interface list using the arrow buttons to
create the required mapping of the ports. Note that these clients may obtain public IP addresses.
4.
Click
Apply/Save
button to make the changes effective immediately.
_________________________________________________________________________________________________
Note:
If a vendor ID is configured for a specific client device, please REBOOT the client device attached to the modem to
allow it to obtain an appropriate IP address.
_________________________________________________________________________________________________
Summary of Contents for D151
