User Guide
188
Log Setup
To configure log settings, click
Maintenance -> Syslog -> Log Setup
as below:
Fields on the screen are described below:
Field
Description
Enable Logging
Enable/disable Log feature. By default, it is
enabled.
Enable Server
Check to enable log server.
Log
Severity
Level
Only logs of severity level equal to or lower than
the specified one can be sent to the log host.
Server IP
Config log server IP address.
Port
By default, it is 514 and can’t be configurable.
4.10.2 Network Diagnostics
This device provides Cable check-up, Ping check-up and Tracert check-up functions for network
diagnose.