User Guide
222
Note:
Set control mode to PORT
TENDA(config-if)# dot1x port-control auto
Note:
Specify port control mode as auto
TENDA(config-if)# dot1x port-control force-authorized
Note:
Specify port control mode as force authorized
TENDA(config-if)# dot1x port-control force-unauthorized
Note:
Specify port control mode as force unauthorized
TENDA(config-if)# dot1x port-reauthentication
Note:
When the port control mode is PORT, you can enable port re-authentication manually
TENDA(config-if)# no dot1x
Note:
Disable 802.1X
802.1X status
TENDA# show dot1x all
Note:
Display 802.1X global settings and port status
TENDA# show dot1x statistics
Note:
Display all ports’ status
TENDA# show dot1x interface gigabitethernet 0/1
Note:
Display a single port’s status
5.3.36 Save Configurations
TENDA# copy running-config startup-config
Note:
Save current settings
TENDA# copy running-config 192.168.111.79
:
mib.conf
Note:
Save current settings to local hard drive via TFTP server
TENDA# copy startup-config 192.168.111.79:mib.conf
Note:
Save settings to local hard drive via TFTP server
Delete settings on port
TENDA(config-if)#no cos
Note:
Delete priority settings on port; the default is 0
TENDA(config-if)# flow-control off
Note:
Disable flow control
TENDA(config-if)# shutdown
Note:
Disable port