User Guide
20
Field
Description
Firmware Version
Displays switch's current firmware version
and release date.
Hardware Version
Displays switch's current hardware version.
MAC Address
Displays switch’s physical address.
Management
VLAN
Displays switch’s management VLAN ID.
VLAN1 is preset to management VLAN by
default.
System Name
Customize a system name for locating the
device quickly.
DHCP
Enable/disable the DHCP feature. When
enabled, the switch can obtain an IP address
automatically (provided that there is an active
DHCP server on the network and switch is
successfully connected to the network); when
disabled, you must config an IP address
manually.
IP Address
Config a static IP address, which will be used
to access the switch's web manager. The
default is 192.168.0.1.
Subnet Mask
Config the corresponding subnet mask of the
IP address specified above. The default is
255.255.255.0.
Gateway
Specify a gateway address for the switch.
MAC Age
This field specifies the length of time a
learned dynamic MAC Address will remain in
the forwarding table without being accessed
(that is, how long a learned MAC Address is
allowed to remain idle). The MAC Address
Aging Time can be set to any value between
10 and 1000000 seconds. The default setting
is 300 seconds.
Note
-------------------------------------------------------------------------------------------------------------------------------
To view the IP address obtained from a DHCP server on the network, access the DHCP server or type the
"show ip" command on telnet interface.
-------------------------------------------------------------------------------------------------------------------------------------------
System Time
1. Overview
The switch allows you to synchronize system time with SNTP server or config time and date settings
manually.