User Guide
50
3. If the MAC address of a Host is classified into 802.1Q VLAN, please set its connected port of the switch
to be a member of this 802.1Q VLAN so as to ensure the packets are forwarded normally.
MAC VLAN---Config
MAC VLAN can only be valid in 802.1Q VLAN mode. Click
VLAN Management -> MAC VLAN
to enter
interface below:
Create MAC VLAN
1. Click
New
to enter interface below:
2. Enter the MAC address you wish to configure.
3. Enter the corresponding MAC address description.
4. Select this MAC VLAN's priority (0~7 available) from the drop-down list.
5. Configure the VLAN ID mapped from MAC address. This VLAN ID must already exist in 802.1Q
VLAN.
6. Click
OK
.
Delete MAC VLAN
As shown above, click the
Delete
button to delete the corresponding MAC VLAN. Up to 64 MAC VLANs
can be supported on this device.