User Guide
142
3. Specify a
Max Packet Size
value, the default is 1500.
4. Configure contact info. The default is www.Tendacn.com.
5. Here you can specify device's physical location.
6. SNMP Version: Select V1, V2c or V3.
7. Click
Add
to create a community name as seen below:
Note:
You must create a view before you can create a community.
8. Community Name: Click
Standard
and select
public
or
private
; click
Custom
and enter a
community name of up to 31 characters.
9. Access Right: Select
Read only
or
Read & Write
.
10. Click
OK
.
Now you can use the V1, or V2c community name to view or config settings of nodes in the MIB.
User
To enter the screen below, click
Device Management -> SNMP -> User
.
This section displays information of added user(s).
Click
Add
to enter interface below: